January 3rd, 2018 – Vancouver, British Columbia; – LiCo Energy Metals Inc. (“the Company” or “LiCo”) TSX-V: LIC, OTCQB: WCTXF is pleased to report assay results for drill holes TE17-02 and TE17-03 completed on the Teledyne Cobalt Property, located 6 km northeast of Cobalt, Ontario.
A summary of the most significant results of the recent drill core assays are:
- TE17-02 0.95% Co over 1.9 m from 143.0 to 144.9 m, incl. 2.58% Co over 0.60 m from 144.30 to 144.90 m
- TE17-02 0.59% Co over 3.9 m from 156.0 to 159.9 m, incl. 2.22% Co over 0.60 m from 156.6 to 157.2 m
On the Teledyne Cobalt Property, the Company completed a total of 11 diamond drill holes totaling 2,200 m in the fall of 2017. The drilling has confirmed the cobalt mineralization on the Property which is consistent with historical grades and widths reported historically.
As reported on the Company’s November 30th, 2017 news release, LiCo has recently completed its 2017 diamond drilling program on its Teledyne and Glencore Bucke Properties completing a total of 32 diamond drill holes, drilling 4,100 m of core. This exploration work satisfies both its flow-through financing obligations and the contractual obligations outlined in the recently acquired Glencore Bucke Property from Glencore plc of Baar Switzerland (LSE: GLEN). The overall drilling program has confirmed and extended the cobalt mineralization on each property and these results are consistent with historical grades and widths in the overall Cobalt Camp. As reported previously, visual cobalt camp style mineralization has been noted in every drill hole that the Company has logged.
The results for diamond drill hole TE17-02 to TE17-03 is summarized in Table 1 below.
Table 1: Summary of Diamond Drill Results
Note: Intervals reported in Table 1 represent core lengths and not true widths.
Tim Fernback, President & CEO of LiCo comments “Having consistently found cobalt in commercial grades of 0.50% and higher is very exciting for our team. This is especially true when we also see extended zones with greater than 2.0% cobalt in the same drill core. We are very much looking forward to getting the remaining drill core results back from the assay lab to confirm that the same cobalt mineralization is found throughout our Glencore Bucke and Teledyne cobalt properties.”
QA/QC Program
LiCo Energy Metals Inc. has implemented a quality assurance/quality control (QA/QC) program for both the Glencore Bucke and Teledyne Property drill programs.
Diamond drill core was logged, then sawed in half, with one half placed in a labelled bag, and the remaining half placed back into the core box and stored in a secured compound. Either a standard or a blank was inserted every 20th sample. All samples were shipped to Activation Laboratories in Ancaster, Ontario. Each sample is coarsely crushed and a 250 g aliquot is pulverized for analysis. A 0.25g sample is digested with a near total digestion (4 acids) and then analyzed using an ICP. QC for the digestion is 14% for each batch, 5 method reagent blanks, 10 in-house controls, 10 samples duplicates, and 8 certified reference materials. An additional 13% QC is performed as part of the instrumental analysis to ensure quality in the areas of instrumental drift. If over limits for Cu, Pb, Zn, and Co are encountered, a sodium peroxide fusion, acid dissolution followed by ICP‐OES is completed. For Ag over limits, a four acid digestion is completed followed by ICP‐OES.
Qualified Person
The Glencore Bucke and Teledyne Properties are managed by Joerg Kleinboeck, P.Geo., (LiCo’s QP), and supervised by Dwayne Melrose, Director and Head of the Technical Advisory Board of LiCo.
The overall drilling program has been conducted as part of LiCo’s flow thru financing and work commitments for Teledyne Property.
About LiCo Energy Metals: https://licoenergymetals.com/
LiCo Energy Metals Inc. is a Canadian based exploration company who’s primary listing is on the TSX Venture Exchange. The Company’s focus is directed towards exploration for high value metals integral to the manufacture of lithium ion batteries.
Glencore Bucke Cobalt Project, Cobalt, Ontario:
The Company has entered into a property purchase agreement to acquire a 100% interest from Glencore Canada Corporation (subsidiary of Glencore plc) in the Glencore Bucke Property, situated in Bucke Township, 6 km east-northeast of Cobalt, Ontario, subject to a back-in provision, production royalty and off-take agreement. Strategically, the Glencore Bucke Property consists of 16.2 hectares and sits along the west boundary of LiCo’s Teledyne Cobalt Project. The Property covers the southern extension of the #3 vein that was historically mined on the neighbouring Cobalt Contact Property located to the north of the Glencore Bucke Property. Diamond drilling in 1981 on the Glencore Bucke Property delineated two zones of mineralization measuring 150m and 70m in length.
Ontario Teledyne Cobalt Project:
The Company has an option to earn 100% ownership, subject to a royalty, in the Teledyne Project located near Cobalt. Ontario. The Property adjoins the south and west boundaries of claims that hosted the Agaunico Mine. From 1905 through to 1961, the Agaunico Mine produced a total of 4,350,000 lbs. of cobalt and 980,000 oz. of silver (Cunningham-Dunlop, 1979). A significant portion of the cobalt that was produced at the Agaunico Mine located along structures that extended southward onto property currently under option to LiCo Energy Metals.
Chile Purickuta Lithium Project:
The Purickuta Project is located within Salar de Atacama, a salt flat encompassing 3,000 km2, being about 100 km long, 80 km wide and home to approximately 37% of the worlds Lithium production. The salar possesses a very high grade of both Lithium (1,840mg/l) and Potassium (22,630mg/l and is close to power, labour, communications, transportation and other infrastructure. The property of 160 hectares is enveloped by a concession owned by Sociedad Quimica y Minera (“SQM”) and lies, significantly, within a few kilometers of the property of CORFO (the Chilean Economic Development Agency) where its leases to both SQM and Albermarle’s Rockwood Lithium Corp Together these two companies have combined production of over 62,000 tonnes of LCE (Lithium Carbonate Equivalent) annually making up 100% of Chile’s current lithium output. The unique characteristics of Salar de Atacama make finished lithium carbonate easier and cheaper to produce than any of its peer group globally.
Purickuta is a smaller exploitation concession rather than a large exploration concession thereby accelerating the task of taking the project to a potential production scenario. Currently, the Chilean government retains ownership of lithium separate from other minerals and thus production can only proceed upon receipt of a special lithium operation contract know as a “CEOL”. In the future, it will be necessary for LiCo and partner to negotiate a production contract with CORFO concurrently with completing any positive feasibility study. “Chile, which has one of the world’s most plentiful supplies of lithium, is pushing ahead with new policies to develop those reserves”. (Reuters Jan 2, 2017).
Nevada Dixie Valley Lithium Project:
The Company has an option to acquire a 100% interest, subject to a 3% NSR, on a large lithium exploration project at the Humboldt Salt Marsh in Dixie Valley, Nevada. The geologic setting and presence of lithium in active geothermal fluids and surface salts in Dixie Valley match characteristics of producing lithium brine deposits at Clayton Valley, Nevada and in South America.
Nevada Black Rock Desert Lithium Project:
The Company has entered into an option agreement whereby the Company may earn an undivided 70% interest, subject to a 3% Net Smelter Return Royalty, in the Black Rock Desert Lithium Project that consists of 128 placer claims (2,560 acres/ 1,036 hectares) in southwest Black Rock Desert, Washoe County, Nevada.
The Company is planning an exploration programs on a number of its properties over the next several months. The technical content of this news release has been reviewed and approved Joerg Kleinboeck, P.Geo., an independent consulting geologist and a qualified person as defined in NI 43-101.
On Behalf of the Board of Directors
Tim Fernback, President & CEO
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Disclaimer for Forward-Looking Information:
This news release may contain forward‐looking statements which include, but are not limited to, comments that involve future events and conditions, which are subject to various risks and uncertainties. Except for statements of historical facts, comments that address resource potential, upcoming work programs, geological interpretations, receipt and security of mineral property titles, availability of funds, and others are forward‐looking. Forward‐looking statements are not guarantees of future performance and actual results may vary materially from those statements. General business conditions are factors that could cause actual results to vary materially from forward‐looking statements.
